Regulation of Catalysts on Tightly Packaged Solid Propellant Energetic Particles: High Combustion Performance with
Zhenhua Tang1,2, Suhang Chen, Hongsheng Yu3
1School of Chemical Engineering/Xi'an Key Laboratory of Special Energy Materials, Northwest University, Xi'an 710069, China.
Abstract:
Although the effectiveness of combustion catalysts promoting the combustion performance of solid propellant (SP) was identified in many research studies, its regulation on the temperature sensitivity coefficient of burning rate (δ) has been rarely explored, where SP with low δ is a big challenge with little progress. Herein, several ammonium perchlorate (AP)-enriched (>70 wt %) pomegranate-structured SP energetic particles (SPPs), AP/nitrocellulose (NC)/Al (SPP), SPP/CoWO4-rGO (SPP-Co), SPP/Bi2WO6-rGO (SPP-Bi), and SPP/CuCo2O4/GO (SPP-Cu), were prepared by the electrospray granulation method, tightly packaging AP with high-efficiency catalysts to promote its reactivity and reduce temperature sensitivity. The pressurization rates of SPPs in a constant volume combustion chamber at 50, 0, and -40 °C were obtained to determine δ. The burning rates of SPP-Co, SPP-Bi, and SPP-Cu loose strips are 0.319, 0.312, and 0.356 m/s, which are increased by 11.1%, 8.7%, and 24.0% compared to that of SPP (0.287 m/s), respectively. The peak pressures and pressurization rates of SPP-Co, SPP-Bi, and SPP-Cu at 0 °C are increased by 18.8%, 10.1%, and 9.1% and 62.3%, 67.1%, and 64.1% compared with SPP, respectively, indicating that these catalysts significantly accelerate the combustion process. Compared with SPP, the δ of SPP-Co, SPP-Bi, and SPP-Cu decreased by 26.6%, 60.6%, and 24.7% at 0-50 °C and 19.5%, 61.6%, and 27.6% at -40-0 °C, respectively. It suggests that the Bi2WO6-rGO catalyst reduces the δ by 61% at -40-50 °C, exhibiting the optimal δ regulation performance. This research introduces a novel approach to lower the δ from the chemical by tightly packaging temperature-sensitive AP with high-efficiency catalysts.
Related Concept Videos
Catalysis
Factors Influencing the Rate of Chemical Reactions
Concentration and Pressure:
The more particles present within a given space, the more likely those particles are to bump into one another....
Predicting Reaction Outcomes
Radical Reactivity: Steric Effects
Along with electronic...
Activation Energy


