Development and validation of an adsorption process for phosphate removal and recovery from municipal wastewater...

In the current international context characterized by the tendency to stricter limits for P concentration in treated wastewater and a strong drive towards phosphate recovery, it is crucial to develop cost-effective technologies to remove and recover phosphate from municipal wastewater (MWW). In this study, an initial screening of the phosphate adsorption performances of 9 sorbents including several hydrotalcites led to the selection of calcined pyroaurite - an innovative material composed of mixed Mg/Fe oxides - as the best-performing one. The assessment of calcined pyroaurite by means of isotherms and continuous-flow adsorption/desorption tests conducted with actual MWW resulted in a high P sorption capacity (12 mg_P g^-1 at the typical phosphate concentration in MWW), the capacity to treat 730 BVs at the 1 mg_P L^-1 breakpoint imposed by the current EU legislation, and a 93 % phosphate recovery. Calcined pyroaurite resulted in satisfactory performances also in a test conducted with a saline MWW deriving from a hotspot of seawater intrusion, a rapidly increasing phenomenon as a result of climate change. Five consecutive adsorption/desorption cycles conducted in a 20-cm column at a 5-min empty bed contact time resulted stable in terms of P adsorption/recovery performances, specific surface area and chemical structure of calcined pyroaurite. In the perspective to apply phosphate recovery with calcined pyroaurite at full scale, the process scale-up to a 60-cm packed bed - close to the column heights of industrial applications - resulted in stable performances. Calcium phosphate, widely used to produce phosphate-based fertilizers, can be obtained from the desorbed product by precipitation with Ca(OH)₂. These results point to calcined pyroaurite as a very promising material for phosphate removal and recovery from MWW and from other P-rich effluents in a circular economy perspective.