Related Experiment Video
Updated: Jun 15, 2025

Normothermic Negative Pressure Ventilation Ex Situ Lung Perfusion: Evaluation of Lung Function and Metabolism
Published on: February 14, 2022
Head-neck local ventilation mode for long-narrow mine working face
Jue Wang1,2,3, Cheng Jiang4, Xihua Zhou2,3
1School of Civil Engineering, Liaoning Technical University, Fuxin, 123000, China.
Abstract:
To improve the thermal health state of workers in mines facing heat hazards and enhance cooling capacity utilization efficiency of mine ventilation, this study proposes a suitable air distribution for mine workers' local cooling, taking into account the characteristics of long-narrow underground space and workers. The suggested air distribution involves harnessing underground cold air jets along with the mine's crossflow (mainstream ventilation) to create a localized safeguard airflow around the worker's head-neck, known as jet ventilation in crossflow (JVIC). The flow visualization experiment identified five flow patterns within a confined space. The study explores the impact of the velocity ratio (R) and confinement scale (C) on the evolution of JVIC flow patterns and presents a parametric description of the resulting flow field. Drawing on the microclimate control scope around mine workers' head-neck, the study defines the effective cooling zone and the ineffective cooling zone as the boundaries for controlling JVIC air distribution within confined mine spaces. This clarifies the applicability of the air distribution form and introduces an evaluation model for assessing the cooling effect and the efficiency of cooling capacity utilization to manage the non-uniform underground environment.
More Related Videos
04:46A Novel Rescue Technique for Difficult Intubation and Difficult Ventilation
Published on: January 17, 2011
09:28Intravital Widefield Fluorescence Microscopy of Pulmonary Microcirculation in Experimental Acute Lung Injury Using a Vacuum-Stabilized Imaging System
Published on: April 6, 2022
Related Concept Videos
Ventilatory Modes
There are three ventilatory modes: full support, partial support, and spontaneous. These are described below.
Full Support Modes
Full support modes include controlled mechanical ventilation, continuous mandatory...
Mechanical Ventilation III: Noninvasive Ventilation
Noninvasive Positive-Pressure Ventilation...
Mechanical Ventilation I: Indication and Settings
Mechanical Ventilation II: Invasive Ventilation
Negative-Pressure Ventilators
Negative-pressure ventilators create a vacuum around the chest or body to draw air into the lungs, simulating breathing. This method does not require an...
Oxygen Delivering System II: Venturi Mask and Transtracheal Oxygen
Venturi Mask
The Venturi mask, named after the Venturi effect, is designed to deliver precise oxygen concentrations. It consists of a large tube with an oxygen inlet that narrows down, causing a pressure drop that pulls air in through adjustable side ports. The mask is a lightweight,...
Oxygen Delivering System I: Nasal Cannula and Face Mask
Nasal Cannula
A nasal cannula is a lightweight tube split at one end into two prongs and placed in the nostrils. It is typically used to deliver low to medium levels of oxygen.
Suggested flow rate: The suggested flow rate for a nasal cannula typically ranges between 1 and 6 L/min.
Oxygen percentage setting:...