Valorization of sponge iron industrial waste into iron-modified zeolite X for ciprofloxacin removal: a...

Ciprofloxacin (CIP), a commonly used antibiotic, is frequently detected in water bodies and the natural environment. The profound health consequences of CIP have led to growing attention focusing on environmental concerns. Adsorption is highly preferred because of its adaptability and remarkable efficiency in removing CIP. Therefore, the current work focuses on synthesizing an eco-friendly and economical adsorbent for removing CIP. The work aims to remove CIP using zeolite X (ZX), synthesized from dolochar, and subsequently modified ZX into iron-modified zeolite X (FeZX) via ion exchange. The synthesized FeZX had a crystallinity of 82.701%, an average pore size of 5.917 nm, a micropore volume of 0.298 cc/g, a micropore area of 451.807 m²/g, and a total surface area of 478.521 m²/g. The effect of parameters such as initial CIP concentration, pH, contact period, adsorbent dosage, and iron dosage was analyzed in the batch adsorption studies of CIP using ZX and FeZX. CIP removal of 37.786% was achieved using ZX; hence, the adsorption parameters were optimized to maximize the CIP removal using response surface methodology (RSM), specifically Box-Behnken Design (BBD) using FeZX. Maximum removal of 97.974% was achieved under optimum conditions of 8.06 pH, contact period of 59.422 min, CIP concentration of 17.117 mg/L, and adsorbent dosage of 0.478 g/L. Freundlich isotherm and pseudo-second-order kinetic models were the most accurate representations of the experimental data. The findings indicate the significance of using this iron-modified mesoporous zeolite as an adsorbent for efficiently treating CIP wastewater.