Quantification and visual inspection of adipic dihydrazide in textile using a xanthylium-based ratiometric
Sifan Wang1, Weijie Wu1, Jiaqi Lv1
1School of Chemical Engineering, Sichuan University, Chengdu 610065, China. hwc@scu.edu.cn.
Abstract:
Residual adipic dihydrazide (ADH) in textiles may react with formaldehyde to form hydrazone, which is a source of the formaldehyde pollutant indoors. In this paper, a xanthylium-based ratiometric fluorescent probe SH-Py was developed for ADH detection. The emission of SH-Py at 680 nm decreased, whereas that at 463 nm increased upon the addition of ADH in pure DMSO. The LOD was as low as 24.5 nM, and the possible sensing mechanism is presented. Good recoveries were observed in the standard recovery experiments of SH-Py for ADH detection in textiles. Moreover, the visualization of ADH in textiles was successfully achieved by spraying the probe solution and then inspecting it under a UV lamp. Additionally, SH-Py has the potential to quantify other aliphatic hydrazides in various samples.
