Macroporous Poly(hydromethylsiloxane) Networks as Precursors to Hybrid Ceramics (Ceramers) for Deposition of...

Poly(hydromethylsiloxane) (PHMS) was cross-linked with 1,3,5,7-tetramethyl-1,3,5,7-tetravinylcyclotetrasiloxane (D₄^Vi) in water-in-oil High Internal Phase Emulsions to form macroporous materials known as polyHIPEs. It was shown that in the process of pyrolysis under Ar atmosphere at 520 °C, the obtained polyHIPEs were converted to ceramers with high yields (82.8-88.0 wt.%). Structurally, the obtained ceramers were hybrid ceramics, i.e., they consisted of Si-O framework and preserved organic moieties. Macropores present in the polyHIPE precursors remained in ceramers. Ceramers contained also micro- and mesopores which resulted from the precursor's mass loss during pyrolysis. Total pore volume and BET specific surface area related to the existence of micro- and mesopores in ceramers depended on the PHMS: D₄^Vi ratio applied in polyHIPE synthesis. The highest total pore volume (0.143 cm³/g) and specific surface area (344 m²/g) were reached after pyrolysis of the precursor prepared with the lowest amount of D₄^Vi as compared to PHMS. The composite materials obtained after deposition of PdO nanoparticles onto ceramers followed by reduction of PdO by H₂ were active and selective catalysts for phenylacetylene hydrogenation to styrene.