Dielectric Response of ZnO/PMMA Nanocomposites with Atmospheric Pressure Plasma-Modified Surfaces

In this work, the effect of etching the surface of polymer matrix nanocomposites with atmospheric pressure plasma targeting to achieve enhanced dielectric properties was investigated. Polymer nanocomposites, with varying reinforcing phase content, were modified by atmospheric-pressure plasma resulting in an increase in the surface filler's concentration. Polymethyl methacrylate (PMMA) matrix nanocomposites reinforced with zinc oxide (ZnO) nanoparticles were prepared and dielectrically studied as a function of the nanoparticle content and the plasma modified surfaces. The electrical response of the composite systems was studied by means of Broadband Dielectric Spectroscopy (BDS) over a wide range of temperatures and frequencies. The dielectric permittivity increased with the embedded phase content and with plasma surface treatment. Energy density followed the same trend as dielectric permittivity, and the plasma-treated nanocomposite with the higher ZnO content exhibited approximately 27% higher energy density compared to the unreinforced matrix.