Related Experiment Video
Updated: Jun 14, 2025

Characterization and Application of Passive Samplers for Monitoring of Pesticides in Water
Published on: August 3, 2016
Application of low-density polyethylene (LDPE) passive samplers for monitoring PAHs in groundwater
Ibukun Ola1, Carsten Drebenstedt2, Robert M Burgess3
1Institute of Mining and Special Civil Engineering, Technical University Mining Academy, Gustav-Zeuner Street 1A, 09599, Freiberg, Germany. Ibukun.Ola@doktorand.tu-freiberg.de.
Abstract:
Equilibrium passive sampling continues to find increasing use for performing in situ assessments and monitoring of hydrophobic organic compounds (HOCs). Although this method has been successfully used in several field studies including open surface waters and sediments, comparatively, their use in groundwater has been very limited. In this study, low-density polyethylene (LDPE) passive samplers were deployed for 80 days in three groundwater wells contaminated with polycyclic aromatic hydrocarbons (PAHs). Prior to deployment, LDPE was loaded with performance reference compounds (PRCs) consisting of deuterated PAHs and their release used to ascertain system equilibrium. Within the 80-day deployment period, LDPE-groundwater equilibrium was confirmed for PAHs with molecular weights (MWs) in the range of 178 to 228 (i.e. anthracene, chrysene). Measured freely dissolved concentrations (Cw) were between one to three orders of magnitude lower than the total filtered concentrations (Ctotal) in the studied wells. The sum of PAHs (ΣPAHs) measured based on Cw and Ctotal were 2.05, 0.07 and 29.2 μg L-1 and 197, 59.7 and 1010 μg L-1, at wells 1, 2 and 3, respectively. A separate dataset, comprising long-term (2010 to 2022) concentrations of PAHs in total (i.e., unfiltered) groundwater, is also presented to provide insight into PAH contamination levels at the assessed groundwater wells based on conventional measurement. Estimated in situ LDPE daily clearance volumes (2.34 to 27.56 Ld-1) for the target analytes were far less than the daily turnover of ground water (144 to 348 Ld-1) encountered in the wells eliminating the possibility of depletive sampling of the groundwater by the passive samplers. These results represent the first published study on the practical application of equilibrium passive sampling using LDPE for monitoring and quantitatively assessing PAHs in groundwater. Also, this work demonstrates that LDPEs are a useful tool for measuring the Cw of PAHs in groundwater, a critical contaminant in many ecological and human health risk assessments.
More Related Videos
10:05Integrated Field Lysimetry and Porewater Sampling for Evaluation of Chemical Mobility in Soils and Established Vegetation
Published on: July 4, 2014
09:04Identifying Per- and Polyfluorinated Chemical Species with a Combined Targeted and Non-Targeted-Screening High-Resolution Mass Spectrometry Workflow
Published on: April 18, 2019
Related Concept Videos
Sampling Methods: Sample Types
Solid samples include a variety of substances, such as sediments from water bodies, soil, metals, and biological tissues. Two standard methods for extracting sediments from water bodies are grab sampling and piston coring. Grab sampling involves using a device to collect a discrete sediment sample from the bottom of a water body with minimal disturbance. Grab samples do not always represent the entire area due to...
Sampling Plans
Random sampling is a method where each member of the population has an equal chance of being selected for the sample. It involves selecting individuals randomly, often using random number generators or lottery-type methods. For example, when analyzing the properties of a...
Gas Chromatography: Types of Detectors-II