High-power hollow-core fiber gas laser at 3.1 µm with a linear-cavity structure

Mid-infrared hollow-core fiber (HCF) gas lasers based on a population inversion regime of gas molecules have made advanced development in recent years, but mostly with single-pass cavity-free structures. Here, we demonstrated a 3.1 µm high-power acetylene-filled HCF continuous wave (CW) laser and a self-Q-switched pulse laser with a linear-cavity structure. This configuration not only facilitates the transformation of amplified spontaneous emission into the laser output but also enhances the coherence of the light source and imparts distinct cavity mode characteristics. Harnessing a homemade high-power 1535 nm single-frequency fiber laser that served as the pump source, a CW laser output of 8.23 W at 3.1 µm was achieved, which is over three orders of magnitude higher than those in reported works so far. The corresponding slope efficiency of 31.8% and beam quality of M_x ² = 1.18 and M_y ² = 1.15 were characterized. When the gas pressure was up to 50 mbar, the laser generated a 3.1 µm self-Q-switched pulse with an output power of 1.98 W as well as a pulse width of 45 ns under the repetition rate of 4.59 MHz. To the best of our knowledge, this is the first time that an HCF gas laser achieves a self-Q-switched pulse. Future studies will aim to further optimize the experimental setup, potentially enabling the direct generation of picosecond pulses in the mid-infrared wavelength band.