Development of an integrated online deposition and corrosion monitoring system in a full-scale solid waste CFB boiler

Solid waste incineration is a clean and sustainable approach for solid waste management. However, ash deposition and corrosion remain a critical issue due to fuel's inherent enrichment of alkali chlorine. This study develops an integrated online deposition and corrosion monitoring system to enhance the operational safety and efficiency of solid waste incineration boilers. This system combines linear polarization resistance (LPR) for corrosion rate estimation with heat flux measurements for ash deposition analysis. It can offer a novel approach for real-time monitoring of heat exchangers' safety during solid waste combustion. It was deployed in a full-scale circulating fluidized bed (CFB) boiler that purely combust solid wastes. Key findings demonstrate the system's capability to deliver continuous, real-time data, crucial for the dynamic control of combustion processes and the maintenance of heat transfer surfaces. Its robust diagnostic capabilities were evident across various scenarios. Specially, initial corrosion rates sharply increase with deposition rates due to the enrichment of alkali chlorine on inner deposit layer, in which chlorine serves as a catalyst, facilitating the rapid penetration and aggravation of corrosion by other agents. As deposit further buildup, the corrosion rate steadily decreases along with surface temperature, highlighting a dynamic interaction. Moreover, measured corrosion rates can quickly response to temperature variations. Such multi-process online monitoring system provide more possibilities to investigate the inherent interaction between deposition and corrosion. Therefore, this work offers insights that could significantly influence operational strategies, maintenance protocols, and the overall reliability of waste-to-energy technologies.