Design and development of a stand-off Raman brassboard (SDU-RRS) for the spectroscopic study of planetary materials

Raman spectroscopy has emerged as a crucial mineral analysis technique in planetary surface exploration missions. Nonetheless, the inherently low Raman scattering efficiency of planetary silicate materials makes it challenging to extract enough Raman information. Theoretical and experimental studies of the remote Raman scattering properties of planetary materials are also urgent requirements for future lunar and planetary explorations. Here, Shandong University Remote Raman Spectrometer (SDU-RRS) was developed to demonstrate the feasibility of lunar remote Raman technology and conduct preliminary research on remote Raman scattering properties. SDU-RRS utilizes a pulsed 532 nm laser, a non-focal Cassegrain telescope, a volume phase holographic grating, an intensified charge-coupled device, and the time-gating technique to detect weak-signal silicate minerals. The spectral resolution obtained with atomic emission lamps was <4.91 cm^-1, and the wavelength accuracy was <1 cm^-1, across the spectral range of 241-2430 cm^-1. SDU-RRS can detect natural augite within a feldspar-olivine-augite matrix at a concentration of 20 % at ∼1 m under ambient lighting conditions. A series of experiments were conducted to evaluate the influence of measurement conditions and physical matrix effects on acquired Raman signals, either qualitatively or quantitatively, on geological materials. The study indicates that the transmission of Raman-scattered light conforms to Lambert's cosine law, and a linear correlation exists between Raman intensity and laser power. The study also evaluated the impact of grain size, surface roughness, porosity, and shadow-hiding effects. Reducing grain size decreases Raman intensity and broadens Raman spectra. These characteristics are essential for achieving definitive mineralogical information from granular materials by remote Raman spectroscopy in lunar and planetary explorations.