Related Experiment Video
Updated: Jun 14, 2025

Continuous Instream Monitoring of Nutrients and Sediment in Agricultural Watersheds
Published on: September 26, 2017
Fully integrated sensor array for additives, permittivity, and pH monitoring for fishery
Xue Yang1, Hongyi Wang2, Haizhong Liu2
1School of Mechanical and Aerospace Engineering, Jilin University, Changchun 130025, China; School of Architecture and Construction, Jilin Jianzhu University, Changchun 130118, China.
Abstract:
Additive abuse in fishery, such as tricaine methanesulfonate (MS222), ciprofloxacin (CPFX), and malachite green (MG), threatens public human health and interferes with the ecological equilibrium of water resources. However, the majority of the present detection methods suffer from high costs, complex operations, and poor portability. Therefore, real-time and rapid detection of the above additive by mobile devices is becoming increasingly important. Here we report the fabrication and performance of an entirely electrochemical system with USB-stick size for simultaneous detection of MS222, CPFX, and MG, as well as pH and permittivity. The limits of detections are 0.17, 0.67, and 0.28 µg/mL, while the resolution ratios are 10 %, 10 %, and 5 % for MS222, MG, and CPFX, respectively. For both pH and permittivity, they have linear regressions measured by brightness and capacitance of the sample respectively, at the range of 1.5-9 (pH) and 10-20 (permittivity). The interference experiments, using target analytes (40 μg/mL) and 15 interfering analytes (80 μg/mL), demonstrated the anti-interference performance of the sensor patches. The field studies on carps, catfishes, and chubs indicated that the developed integrated portable system could be used for real sample analysis with high performance.
More Related Videos
11:18Manufacturing of a Nafion-coated, Reduced Graphene Oxide/Polyaniline Chemiresistive Sensor to Monitor pH in Real-time During Microbial Fermentation
Published on: January 7, 2019
10:08Construction and Setup of a Bench-scale Algal Photosynthetic Bioreactor with Temperature, Light, and pH Monitoring for Kinetic Growth Tests
Published on: June 14, 2017