Related Experiment Video
Updated: Jun 14, 2025

Measuring Dissolved Methane in Aquatic Ecosystems Using An Optical Spectroscopy Gas Analyzer
Published on: July 26, 2024
All-Optical Photoacoustic Spectroscopy-Based Dual-Component Greenhouse Gas Analyzer
Min Guo1, Mengda Zhou1, Beilei Yang1
1Zhejiang Engineering Research Center of MEMS, Shaoxing University, Shaoxing, Zhejiang 312000, China.
Abstract:
To achieve high sensitivity detection of dual-component greenhouse gases carbon dioxide and methane simultaneously, a multimechanism synergistic enhanced all-optical photoacoustic spectroscopy gas analyzer is presented. The acoustic resonance of the photoacoustic cell and the mechanical resonance of a fiber-optic cantilever acoustic sensor are used to enhance the photoacoustic signals of the dual-component gas. The optimized multipass beam reflection structure enhances the effective excitation power of the dual-component gas. The highly sensitive detection of carbon dioxide and methane at dual-frequency operating points is realized by dual-channel laser modulation combined with dual-input digital lock-in amplification technology. The Allan-Werle deviation analysis results show that with a 100 s average time, the minimum detection limits of carbon dioxide and methane are 76.5 and 1.9 ppb, respectively. The corresponding normalized noise equivalent absorption (NNEA) coefficients are 3.1 × 10-10 and 2.9 × 10-10 cm-1 W/Hz1/2, respectively.
Related Concept Videos
Gas Chromatography: Types of Detectors-II
Gas Chromatography–Mass Spectrometry (GC–MS)
A gas chromatograph consists of a long, narrow capillary column with a polysiloxane coating on the inner wall....
Inductively Coupled Plasma Atomic Emission Spectroscopy: Instrumentation
There are three main types of inductively coupled plasma atomic emission spectroscopy (ICP-AES) instruments: sequential, simultaneous multichannel, and Fourier transform instruments, with the latter being less commonly used....
Gas Chromatography: Overview of Detectors
A non-destructive detector allows a sample to be analyzed without altering or consuming it, meaning the sample can be collected after detection for further analysis. Examples include thermal conductivity detectors and...
Atomic Absorption Spectroscopy: Instrumentation
The atomizer used in AAS can be either a flame atomizer or an...
Atomic Emission Spectroscopy: Instrumentation

