Related Experiment Video
Updated: Jun 14, 2025

Artificial Thermal Ageing of Polyester Reinforced and Polyvinyl Chloride Coated Technical Fabric
Published on: January 29, 2020
Bio-based flame retardant coatings for polyester/cotton fabrics with high physical properties using ammonium vinyl
Lijin Xie1, Huimin Duan1, Kai Chen2
1Zhejiang Provincial Engineering Research Center for Green and Low-carbon Dyeing & Finishing, Zhejiang Sci-Tech University, Hangzhou 310018, PR China; Key Laboratory of Eco-Dyeing and Finishing of Textile, Ministry of Education, Zhejiang Sci-Tech University, Hangzhou 310018, PR China.
Abstract:
Polyester/cotton (T/C) blended fabrics are widely utilized in textile due to the dimensional stability and high elasticity provided by polyester, combined with the comfort and moisture absorption offered by cotton. However, simultaneously enhancing the flame retardancy and maintaining the physical properties of T/C blended fabrics for clothing and furniture applications remains a big challenge. This study introduces a bio-based flame-retardant coating using polyelectrolyte complexes (PEC) composed of ammonium vinyl phosphonate-grafted chitosan (AMVP-g-CS). The protonation degree of the PEC coating is controlled by adjusting the pH to solidify and stabilize the complex structure, preparing bio-based PEC flame retardant T/C blended fabric. Flame retardant analysis reveals that the coated fabrics achieved a limiting oxygen index of 30.5 % and a char length of 11 mm, indicating significantly improved flame retardancy. The combustible volatile substances are significantly reduced for the coated fabrics, achieving a gas-phase flame retardant effect, and forming an expansive char layer with thermal insulation and oxygen blocking properties. Importantly, physical analysis proves that the PEC deposition improved mechanical properties, satisfactory whiteness index and hand feeling of the fabrics. This work opens up a pragmatic and industrially feasible strategy for the development of CSs in the field of flame retardant coating.
Related Concept Videos
Types of Step-Growth Polymers: Polyesters
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the...
Anionic Chain-Growth Polymerization: Overview

