ℒ1adaptive resonance ratio control for series elastic actuator with guaranteed transient performance

Series elastic actuator (SEA) technology is promising for the development of compliant robotic joints. Despite advancements in the realization of precise tracking, challenges persist in controlling the vibration and transient performance. This study enhanced the resonance ratio control (RRC) algorithm by integrating it with the L1 adaptive control (L1AC) method to address overshoot, static error, and vibration in SEA position control. Initially, the resonance between the motor and link sides caused by the elastic transmission structure was analyzed, which can result in overshoots and vibrations that affect the transient performance of the SEA control. Subsequently, a control scheme based on L1AC was introduced to enhance the performance. The stability of the proposed algorithm was demonstrated through a comprehensive exploration of key control parameters. Furthermore, the algorithm was augmented with gravity compensation, effectively reducing the predicted and reference errors. Consequently, the transient performance was improved. The efficacy of this enhanced algorithm was validated through simulations and experimental platforms, and comparisons with the RRC and model reference adaptive control algorithms. In all the experiments, the overshoot did not exceed 1.1%, the maximum jitter amplitude on the link side was within 0.2° , and a larger time constant in the controller could effectively eliminate the overshoot and vibration with a small response time delay. Furthermore, the algorithm exhibited a protective response during link side collisions by moderating link velocity and limiting motor current, to safeguard the contact environment, humans, and the SEA itself, which take advantage of the L1AC's low-pass filter (LPF) properties in disturbance handling.