Selective regulation of products for guaiacol hydrodeoxygenation by adjusting type and acidity of supports

Upgrading lignin-oil into advanced fuels or chemicals has been widely studied in recent years. To understand the effect of support type and acidity on the hydrodeoxygenation (HDO) of guaiacol (lignin-oil model compound), Ni-based catalysts were prepared with SiO₂, Al₂O₃ and ZSM-5 as supports, respectively. The catalysts were characterized by X-ray diffraction (XRD), N₂ adsorption desorption, X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and Pyridine adsorption Fourier-transform infrared (Py-IR). The research results indicate that selective regulation of guaiacol hydrogenation products can be achieved by changing the type and acidity of support. Cyclohexanol is the main product over Ni/SiO₂, while cyclohexane is the main product over Ni/ZSM-5 series catalysts. Moreover, as the Si/Al ratio increases, the catalytic activity of Ni/ZSM-5 slightly decreases, and the yield of cyclohexane also decreases. The Brønsted acidity of the support is the key to promoting the conversion of cyclohexanol to cyclohexane. The formation of NiAl₂O₄ is the main reason for the relatively low activity of Ni/Al₂O₃. The conversion of guaiacol is as high as 99.2 %, and the yield of cyclohexane is as high as 86.6 % over Ni/ZSM-5(Si/Al = 27). In addition, complete conversion of guaiacol and 92.6 % yield of cyclohexanol were achieved over Ni/SiO₂. More importantly, Ni/SiO₂ and Ni/ZSM-5(27) are suitable for aromatic substrates with different substituents, respectively.