Related Experiment Video
Updated: Jun 13, 2025

A Standard and Reliable Method to Fabricate Two-Dimensional Nanoelectronics
Published on: August 28, 2018
Recent Advances in Chemoresistive Gas Sensors Using Two-Dimensional Materials
Jae-Kwon Ko1,2, In-Hyeok Park2, Kootak Hong3
1Division of Chemical and Material Metrology, Korea Research Institute of Standards and Science (KRISS), Daejeon 34113, Republic of Korea.
Abstract:
Two-dimensional (2D) materials have emerged as a promising candidate in the chemoresistive gas sensor field to overcome the disadvantages of conventional metal-oxide semiconductors owing to their strong surface activities and high surface-to-volume ratio. This review summarizes the various approaches to enhance the 2D-material-based gas sensors and provides an overview of their progress. The distinctive attributes of semiconductor gas sensors employing 2D materials will be highlighted with their inherent advantages and associated challenges. The general operating principles of semiconductor gas sensors and the unique characteristics of 2D materials in gas-sensing mechanisms will be explored. The pros and cons of 2D materials in gas-sensing channels are discussed, and a route to overcome the current challenges will be delivered. Finally, the recent advancements to enhance the performance of 2D-material-based gas sensors including photo-activation, heteroatom doping, defect engineering, heterostructures, and nanostructures will be discussed. This review should offer a broad range of readers a new perspective toward the future development of 2D-material-based gas sensors.
More Related Videos
06:39Aerosol-assisted Chemical Vapor Deposition of Metal Oxide Structures: Zinc Oxide Rods
Published on: September 14, 2017
10:31Detection and Recovery of Palladium, Gold and Cobalt Metals from the Urban Mine Using Novel Sensors/Adsorbents Designated with Nanoscale Wagon-wheel-shaped Pores
Published on: December 6, 2015
Related Concept Videos
Gas Chromatography: Types of Detectors-II
Gas Chromatography: Types of Detectors-I
TCD is the earliest and most widely used detector that operates by measuring the changes in the thermal conductivity of the carrier gas. When a sample compound enters the detector,...
Gas Chromatography: Overview of Detectors
A non-destructive detector allows a sample to be analyzed without altering or consuming it, meaning the sample can be collected after detection for further analysis. Examples include thermal conductivity detectors and...
Two-Dimensional (2D) NMR: Overview
The first step is the preparation period, during which nucleus A is excited with a radiofrequency pulse....