A recyclable dispersant based on carbomer utilizing controllable viscosity for high-efficiency dispersion of carbon...

Good dispersion of carbon fibers is important for the carbon paper production, which is usually achieved using low carbon fiber concentrations and disposable dispersants. In this study, we developed carbomer as a recyclable and high-efficiency dispersant for carbon fibers. When the carbon fiber concentration was 0.1 wt%, carbon fiber suspension showed improved dispersion performance as increasing the carbomer dosage. It exhibited low Turbiscan Stability Index (TSI) of 0.41 and small change of delta backscattering between -0.5 to 0.8 % when using 0.5 wt% carbomer. However, the good dispersibility fade away when increasing the concentration of carbon fibers. Subsequently, the pH of the carbon fiber suspension was adjusted to 7.0 to improve the dispersibility by increasing the viscosity, but causing a worse flowability. Then the pH was further adjusted to 13.0 to ensure good flowability in the wet-forming process and good dispersibility at carbon fiber concentration of 0.5 wt%. More importantly, the dispersant was successfully recycled and still exhibited excellent dispersion effects for carbon fibers after 5 cycles. Notably, the high-efficiency dispersion of carbon fibers and the recyclability of dispersant were achieved simultaneously for the first time, which is suitable for the eco-friendly and sustainable production of carbon paper.