Multi-Objective Optimization and Mechanical Properties Analysis of Steel-PVA Hybrid Fiber-Reinforced Cementitious...

When steel fiber and PVA fiber produced in China and PVA fiber made in Japan are prepared according to the appropriate proportions, the mechanical properties of hybrid fiber-reinforced cementitious composites (HFRCC) are better, which is beneficial to cost control and has wide application prospects. The effects of the volume content of steel fibers and the volume substitution rate of PVA fibers on the tensile strength, compressive strength, and flexural strength of HFRCC were analyzed using the factor optimization method and principal component analysis (PCA). Through the principal component analysis of HFRCC, a mathematical model for comprehensive performance evaluation was established, and a multi-objective optimization was carried out. The results show that compared with the matrix, the tensile strength, compressive strength, and flexural strength of concrete increase significantly when the volume content of steel fibers is 0.2-0.4% and the volume substitution rate of domestically produced PVA fibers in China or PVA fibers produced in Japan is 50-100%. The maximum cost reduction is 88.25%, and the strength index of HFRCC can reach the optimum; the weights of each factor on the performance of HFRCC were obtained through mathematical statistics. Combined with a variable correlation analysis, these indicators should be noted when optimizing the performance of HFRCC. The research results can provide a basis for the preparation of HFRCC.