A Spectral Detection Method Based on Integrated and Partition Modeling for Trace Copper in High-Concentration Zinc...

In zinc smelting solution, because the concentration of zinc is too high, the spectral signals of trace copper are masked by the spectral signals of zinc, and their spectral signals overlap, which makes it difficult to detect the concentration of trace copper. To solve this problem, a spectrophotometric method based on integrated and partition modeling is proposed. Firstly, the derivative spectra based on continuous wavelet transform are used to preprocess the spectral signal and highlight the spectral peak of copper. Then, the interval partition modeling is used to select the optimal characteristic interval of copper according to the root mean square error of prediction, and the wavelength points of the absorbance matrix are selected by correlation-coefficient threshold to improve the sensitivity and linearity of copper ions. Finally, the partial least squares integrated modeling based on the Adaboost algorithm is established by using the selected wavelength to realize the concentration detection of trace copper in the zinc liquid. Comparing the proposed method with existing regression methods, the results showed that this method can not only reduce the complexity of wavelength screening, but can also ensure the stability of detection performance. The predicted root mean square error of copper was 0.0307, the correlation coefficient was 0.9978, and the average relative error of prediction was 3.14%, which effectively realized the detection of trace copper under the background of high-concentration zinc liquid.