Performance Comparison of DOI-Encoding PET Detectors Based on 1.1-mm Pitch BGO Arrays With Different Reflectors

Bismuth germanate (BGO)-based positron emission tomography (PET) detectors are potential candidates for low-dose imaging PET scanners, owing to the high stopping power and low background radiation of BGO. In this paper, we compared the performance of two dual-ended readout PET detectors based on 15 × 15 BGO arrays. Both arrays had the same 1.1 mm pitch but utilized different reflectors - barium sulfate (BaSO₄) and enhanced specular reflector film (ESR) - for high-resolution PET applications. The detectors were constructed with Hamamatsu 13361-2050-08 SiPM arrays. Each BGO element had dimensions of 1.02 × 1.02 × 20 mm³. The lateral surfaces of the BGO elements were unpolished (saw-cut), while the two ends were polished. Flood histograms showed that the detector based on the BGO array with BaSO₄ reflector had much better crystal identification and depth-of-interaction (DOI) resolution. Specifically, the energy, DOI, and timing resolutions for the detector using the BGO array with BaSO₄ reflector were 19.8 ± 1.5%, 4.13 ± 0.48 mm, and 2.80 ± 0.23 ns, respectively. In contrast, the values obtained using the BGO array with ESR reflector were 20.9 ± 2.1%, 7.69 ± 1.92 mm, and 2.93 ± 0.20 ns, respectively.