Related Experiment Video
Updated: Jun 13, 2025

Safety Precautions and Operating Procedures in an ABSL-4 Laboratory: 3. Aerobiology
Published on: October 3, 2016
Fire safety status and evacuation of medical facility considering elevated oxygen concentrations
Mohsin Ali Shaikh1, Rehmat Karim1, Nashiru Mumuni Daniel1
1State Key Laboratory of Fire Science, University of Science and Technology of China, JinZhai Road 96, Hefei, Anhui, 230026, China.
Abstract:
The prevalence of infectious diseases and rapid population expansion has increased the number of medical facilities. Due to the patients' limited mobility, these hospitals are more susceptible to fire disasters. Both Pathfinder and Fire Dynamic simulators were used to calculate the required safe evacuation time (RSET), heat release rate, visibility, temperature, CO, and oxygen effects on temperature, and available safe evacuation time (ASET). The safety egress of the medical hospital was then evaluated by comparing the available safe evacuation time (ASET) and required safe evacuation time (RSET). The simulation findings showed that the egress guides depend on delay time when delay time increases the egress guides drop. We also studied the importance of egress route decisions and suggested that at least 20 to 30 egress guides be on duty in the medical facility. The safety criteria for the medical facility have been proposed based on the delay time with the normalized egress guides. The high oxygen concentration in a hospital can put the medical staff and patients in danger and limit the required safe egress time to less than 150s. The proposed measures can be used to assess the evacuation safety of a typical medical hospital in use relatively quickly and efficiently.
More Related Videos
05:46A Novel Inhalation Mask System to Deliver High Concentrations of Nitric Oxide Gas in Spontaneously Breathing Subjects
Published on: May 4, 2021
14:52Recording Brain Electromagnetic Activity During the Administration of the Gaseous Anesthetic Agents Xenon and Nitrous Oxide in Healthy Volunteers
Published on: January 13, 2018
Related Concept Videos
Administering Oxygen by Mask
Administering oxygen by mask is a common nursing intervention that provides supplemental oxygen to patients with respiratory distress or chronic lung conditions. This procedure involves delivering oxygen at a specified rate through a face mask connected to an oxygen source.
Equipment
The equipment necessary for this procedure includes:
Oxygen Delivering System II: Venturi Mask and Transtracheal Oxygen
Venturi Mask
The Venturi mask, named after the Venturi effect, is designed to deliver precise oxygen concentrations. It consists of a large tube with an oxygen inlet that narrows down, causing a pressure drop that pulls air in through adjustable side ports. The mask is a lightweight,...
Administering Oxygen by Nasal Cannula
Nasal Cannulas
A nasal cannula is a lightweight tube split into two prongs placed in the nostrils,...
Oxygen Delivering System III: Tracheostomy and T-piece
Tracheostomy
A tracheostomy is a surgically created opening (stoma) in the anterior part of the trachea. It is used to establish a patient airway, bypass an upper airway obstruction, simplify the removal of secretions, permit long-term...
Respiratory Assessment: Purpose and Indications
Objectives and Importance:
The primary goal of respiratory assessment is to evaluate patients at early risk of clinical deterioration. Since respiratory distress often precedes other signs of declining health, breathing patterns and sounds become a...
Oxygen Delivering System I: Nasal Cannula and Face Mask
Nasal Cannula
A nasal cannula is a lightweight tube split at one end into two prongs and placed in the nostrils. It is typically used to deliver low to medium levels of oxygen.
Suggested flow rate: The suggested flow rate for a nasal cannula typically ranges between 1 and 6 L/min.
Oxygen percentage setting:...