Design and validation of a method for evaluating medical device cleanliness by recovering and quantifying residual...

We recently reported a method for recovering and quantifying residual proteins bound to surfaces of various medical instruments via thermal coagulation under neutral pH and room temperature. The method effectively recovered and solubilised coagulated proteins at high temperatures in dry and humid conditions, with a protein recovery rate of > 90%. This study validated the previous method by comparing residual protein recovery from test samples using a conventional extraction solution (1% SDS, [pH 11.0]) and proposed solution (1% SDS, 10 mM TCEP, and 10 mM HEPES [pH 7.0]). To mimic soiled medical equipment, pseudo-blood-contaminated stainless steel plates were prepared. Residual protein was recovered using conventional and proposed solutions under varying temperature and humidity conditions. Quantitative protein recovery limits were determined at nine facilities. Compared with the conventional solution, the proposed solution recovered proteins more effectively from samples processed at temperatures > 60 °C. However, low recovery rates were observed for samples processed at 95 °C, possibly owing to differences in protein adhesion due to sample and plate-surface properties. Our findings present a method for quantifying residual proteins on medical instruments exposed to high temperatures during use or disinfection. Further studies should standardise test soiling conditions, materials, and solutions to evaluate cleaning methods.