An electronic energy compensation method for flattening the energy response of SiPM-GGAG:Ce,B based gamma detector

The energy response of gross gamma dose rate monitors needs to be flat in order to prevent overestimation of dose at low gamma energies. In this paper, a discriminator threshold modulation based electronic energy compensation algorithm has been proposed for SiPM-scintillator based gamma detectors. Theoretical simulation studies were carried out in order to optimize the parameters of the periodic ramp voltage used for modulation of the discriminator threshold of a SiPM-GGAG:Ce,B based gamma dose rate monitor. A customized threshold modulation circuit and signal processing electronics were developed for this gamma detector. For experimentally optimizing the parameters, the energy response studies of the detector, with and without the discriminator threshold modulation, were carried out. With the optimized parameters for a periodic ramp threshold, the count rates for 241Am (60 keV) and 60Co (1173 and 1332 keV) were observed to be within ±30% of the count rate obtained for 137Cs (662 keV). Using the electronic energy compensation techniques presented in this paper, a flat energy response of the SiPM-scintillator gamma detector for the energy range of 60 keV to 1.5 MeV could be achieved.