Efficient Polycrystalline Single-Cation Perovskite Light-Emitting Diodes by Simultaneous Intracrystal and Interfacial...

Polycrystalline perovskite light-emitting diodes (PeLEDs) have shown great promise with high efficiency and easy processability. However, PeLEDs using single-cation polycrystalline perovskite emitters have demonstrated low efficiency due to defects within the grains and at the interfaces between the perovskite layer and the charge injection contact. Thus, simultaneous defect engineering of perovskites to suppress exciton loss within the grains and at the interfaces is crucial for achieving high efficiency in PeLEDs. Here, 1,8-octanedithiol which is a strong nucleophile, is used to increase the luminescence efficiency of a single-cation perovskite by suppressing non-radiative recombination within the grains of their polycrystalline emitter film as well as at their interface with an anode. The dithiol additive performs a multifunctional role in defect passivation, spatial confinement of excitons, and prevention of exciton quenching at the interface between the perovskite layer and the underlying hole-injection layer. Photoluminescence studies demonstrate that incorporating the dithiol additive significantly enhances the charge carrier dynamics in perovskites, resulting in an external quantum efficiency (EQE) of up to 23.46% even in a simplified PeLED that does not use a hole-injection layer. This represents the highest level of EQE achieved among devices utilizing polycrystalline single-cation perovskites.