Atmospheric pressure dielectric barrier discharge plasma for in-situ water treatment using a bubbling reactor

Non-thermal plasma has been an emerging technology for water treatment for decades. In this study, we have designed and fabricated a bubbling plasma batch reactor using an atmospheric pressure dielectric barrier discharge with a hydrophobic porous membrane. The reactor performance is assessed for purifying synthetic contaminated water samples containing chemical contaminant sulfamethoxazole (SMX), a widely used antibiotic, and biological contaminant E. coli K12. The SMX decontamination tests indicate that the degradation process is not first-order and the reaction rate dwindle with increasing initial concentration. The yield at 50% removal achieves its highest value of 8.12 g/kWh for 50 mg/L SMX sample. For inactivation of E. coli K12 tests, the inactivation process is also not first-order, and the pathogen is completely inactivated for 10² CFU/mL and 10⁴ CFU/mL cases after 10 min and 45 min of plasma treatment, respectively. For the 10⁸ CFU/mL sample, a 5-log reduction is achieved after 60 min of treatment. The developed plasma reactor can achieve fast deployment in point of use, low cost for manufacturing, and simple for maintenance. Moreover, it can be used for in-situ water purification in future long duration crewed space missions as well as tackling with water pollution issues on our planet.