Application of high-density 2D receiver coil arrays for improved SNR in prostate MRI

To study if adaptive image receive (AIR) receiver coil elements can be configured into a 2D array with high (>45% by diameter) element-to-element overlap, allowing improved SNR at depth (0.7-1.5× element diameter) versus conventional (20%) overlap.

An anterior array composed of twenty 10-cm diameter elements with 45% overlap arranged into a 4 × 5 grid and a similar 3 × 7 twenty-one-element posterior array were constructed. SNR and g-factor were measured in a pelvic phantom using the new high-density (HD) arrays (41 total elements) and compared to vendor AIR-based arrays (30 total elements) with conventional overlap. T₂-weighted fast-spin-echo (T2SE) images acquired using both arrays were compared in 20 subjects. SNR was estimated in vivo. Results were compared blindly by three uroradiologists using a five-point scale. Images using the HD arrays were also compared to a set of images acquired over a range of acceleration factors (R = 2.0, 2.5, 3.0) with the conventional arrays.

SNR within the phantom was on average 15% higher for R = 1.0, 1.5, and 2.0 using the HD arrays. Across the 20 subjects SNR within the prostate was 11% higher and assessed radiologically as significantly higher (p < 0.001) for the HD versus conventional arrays. At all acceleration factors the new HD arrays outperformed the conventional arrays (p ≤ 0.01), allowing increased R for similar SNR.

AIR elements can be configured into 2D arrays with high (45%) element-to-element overlap, consistently providing increased SNR at depth versus arrays with conventional (20%) overlap. The SNR improvement allows increased acceleration in T2SE prostate MRI.