Scientific preparation for JRT: Wind pressure prediction model for large radio telescope based on real data from...

Jingdong 120-meter radio telescope (JRT) is poised to become the world's largest single-aperture fully steerable medium-low frequency radio telescope. However, like other large-aperture radio telescopes, the JRT is vulnerable to wind loads, which can cause structural deformation and pointing errors. Addressing this challenge requires the ability to predict dynamic winds in real-time. This study developed a wind pressure preprocessing and prediction model using sensor data collected from the Kunming 40-meter radio telescope (KRT), enabling real-time prediction of wind pressure on the telescope. The model employs adaptive noise and Variational Mode Decomposition (VMD) techniques to eliminate random noise from the original wind pressure data. Subsequently, wind pressure predictions are made using a Bidirectional Long Short-term Memory (BiLSTM) model. By conducting predictions under various stabilization conditions and conducting a thorough analysis of measurement data from five sensors, the study has achieved impressive results in predicting wind pressure on the KRT reflector surface. The proposed model demonstrates the lowest MAE, RMSE, and MAPE, while achieving the highest $$ across various data sets. Where the average $$ of the proposed model is 0.9392 at 45° pitch angle attitude and the RMSE, MAE and MAPE values are 1.4923, 1.2377 and 1.82% respectively. This model helps wind load monitoring of real-time wind pressure monitoring of the telescope surface, to study the effects of wind load on pointing accuracy. By adjusting the control parameters to reduce wind load interference, to ensure the high-precision work of a large radio telescope, such as JRT.