Influence of Test Method on the Determination of Tensile Strength Perpendicular to Grain of Timber for Civil...

Tensile perpendicular to grain is an important mechanical property in the design of joints in timber structures. However, according to the standards, this strength can be determined using at least two different methods: uniaxial tensile and three-point static bending. In this context, the present paper aims to investigate the influence of these test methods on the determination of tensile strength perpendicular to grain of wood used in civil construction timber. Three wood species from Brazilian planted forests (Pinus spp., Eucalyptus saligna, and Corymbia citriodora) were used in this investigation. Twelve specimens of each species were used for each test method investigated. Moreover, a statistical analysis was performed to propose an adjustment to the equation of the Code of International Organization for Standardization 13910:2014 for the three-point bending test. Tensile strength values perpendicular to grain obtained from the uniaxial tensile test were significantly higher than those determined by the three-point bending test. It is proposed that the tensile strength perpendicular to grain can be determined more precisely with adoption of coefficient 5.233 in the term [(3.75·Fult)/b·Lh] of the equation specified by the Code of International Organization for Standardization 13910:2014 for the three-point bending test.