Enhancing Mechanical Properties of Graphene/Aluminum Nanocomposites via Microstructure Design Using Molecular...

This study explores the mechanical properties of graphene/aluminum (Gr/Al) nanocomposites through nanoindentation testing performed via molecular dynamics simulations in a large-scale atomic/molecular massively parallel simulator (LAMMPS). The simulation model was initially subjected to energy minimization at 300 K, followed by relaxation for 50 ps under the NPT ensemble, wherein the number of atoms (N), simulation temperature (T), and pressure (P) were conserved. After the model was fully relaxed, loading and unloading simulations were performed. This study focused on the effects of the Gr arrangement with a brick-and-mortar structure and incorporation of high-entropy alloy (HEA) coatings on mechanical properties. The findings revealed that Gr sheets (GSs) significantly impeded dislocation propagation, preventing the dislocation network from penetrating the Gr layer within the plastic zone. However, interactions between dislocations and GSs in the Gr/Al nanocomposites resulted in reduced hardness compared with that of pure aluminum. After modifying the arrangement of GSs and introducing HEA (FeNiCrCoAl) coatings, the elastic modulus and hardness of the Gr/Al nanocomposites were 83 and 9.5 GPa, respectively, representing increases of 21.5% and 17.3% compared with those of pure aluminum. This study demonstrates that vertically oriented GSs in combination with HEA coatings at a mass fraction of 3.4% significantly enhance the mechanical properties of the Gr/Al nanocomposites.