Electrical Conductivity, Thermo-Mechanical Properties, and Cytotoxicity of...

Electrically conductive polymeric materials have recently garnered significant interest from researchers due to their potential applications in the biomedical field, including medical implants, tissue engineering, flexible electronic devices, and biosensors. Poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) is considered the most successful conducting polymer due to its higher electrical conductivity and chemical stability, but it suffers from limited solubility in common organic solvents, poor mechanical properties, and low biocompatibility. An area of tremendous interest is in combining PEDOT:PSS with another polymer to form a blend or composite material in order to access the beneficial properties of both materials. However, the hydrophilic nature of PEDOT:PSS makes it difficult to produce composites with non-polar polymers. In order to overcome these problems, we have specifically designed and synthesized two new sulfonated polyurethanes (PUS) with high sulfonic acid functionality. The two polyurethanes, one water-soluble (PUS1) and one water-insoluble (PUS2), were used to make blends with two commercially available PEDOT:PSS formulations (Clevios^TM FET and PH1000). Solvent cast films on glass substrates were made from water-soluble PEDOT:PSS/PUS1 blends while free-standing films of PEDOT:PSS/PUS2 blends were fabricated by compression-moulding. Ethylene glycol was used as conductivity enhancer, which showed an increase in the conductivity by several orders of magnitude in most of the compositions investigated. The highest conductivity of 438 S cm^-1 was achieved for the blend with 80 wt% of PEDOT:PSS (PH1000) in PUS1.