Related Experiment Video
Updated: Jun 11, 2025

Plasma-assisted Molecular Beam Epitaxy of N-polar InAlN-barrier High-electron-mobility Transistors
Published on: November 24, 2016
Improvement of Single Event Transient Effects for a Novel AlGaN/GaN High Electron-Mobility Transistor with a P-GaN
Juan Xiong1, Xintong Xie2, Jie Wei2
1Henan Key Laboratory of Smart Lighting, School of Information Engineering, Huanghuai University, Zhumadian 463000, China.
Abstract:
In this paper, a novel AlGaN/GaN HEMT structure with a P-GaN buried layer in the buffer layer and a locally doped barrier layer under the gate (PN-HEMT) is proposed to enhance its resistance to single event transient (SET) effects while also overcoming the degradation of other characteristics. The device operation mechanism and characteristics are investigated by TCAD simulation. The results show that the peak electric field and impact ionization at the gate edges are reduced in the PN-HEMT due to the introduced P-GaN buried layer in the buffer layer. This leads to a decrease in the peak drain current (Ipeak) induced by the SET effect and an improvement in the breakdown voltage (BV). Additionally, the locally doped barrier layer provides extra electrons to the channel, resulting in higher saturated drain current (ID,sat) and maximum transconductance (gmax). The Ipeak of the PN-HEMT (1.37 A/mm) is 71.8% lower than that of the conventional AlGaN/GaN HEMT (C-HEMT) (4.85 A/mm) at 0.6 pC/µm. Simultaneously, ID,sat and BV are increased by 21.2% and 63.9%, respectively. Therefore, the PN-HEMT enhances the hardened SET effect of the device without sacrificing other key characteristics of the AlGaN/GaN HEMT.
Related Concept Videos
Carrier Generation and Recombination
This process is given by the generation rate G and is efficient due to the conservation of momentum between the valence band maximum and conduction band minimum.
Indirect generation involves an...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity...
Field Effect Transistor

