Preparation and Performance of Leather-Finished Plywood

In order to achieve batch production, we propose a simple and fast method to prepare leather-finished plywood. In this study, ethylene-vinyl acetate was selected as the intermediate layer to prepare EVA/polyurethane (PU) leather composites. ESEM, tensile property test and compressive property test were used to characterize the microstructure and physical-mechanical properties of the composites. The response surface method (RSM) was also used to explore the relationship between hot pressing temperature, hot pressing pressure and hot pressing time. The significance of the factors and the interactions between the two factors were determined by ANOVA, with the most significant effect being that of the temperature. The theoretical optimal hot pressing process conditions were calculated by the regression equation as a temperature of 124.4 °C, a time of 200 s and a pressure of 1.3 MPa. The surface bond strength of the test specimen measured under this condition was 1.89 MPa, it has good finishing properties and the impregnation peel strength and surface bond strength met the requirements of GB/T 15104-2021.