Effects of wind turbine dimensions on the collision risk of raptors: A simulation approach based on flight height...

Wind energy development is a key component of climate change mitigation. However, birds collide with wind turbines, and this additional mortality may negatively impact populations. Collision risk could be reduced by informed selection of turbine dimensions, but the effects of turbine dimensions are still unknown for many species. As analyses of mortality data have several limitations, we applied a simulation approach based on flight height distributions of six European raptor species. To obtain accurate flight height data, we used high-frequency GPS tracking (GPS tags deployed on 275 individuals). The effects of ground clearance and rotor diameter of wind turbines on collision risk were studied using the Band collision risk model. Five species had a unimodal flight height distribution, with a mode below 25 m above ground level, while Short-toed Eagle showed a more uniform distribution with a weak mode between 120 and 260 m. The proportion of positions within 32-200 m ranged from 11 % in Marsh Harrier to 54 % in Red Kite. With increasing ground clearance (from 20 to 100 m), collision risk decreased in the species with low mode (-56 to -66 %), but increased in Short-toed Eagle (+38 %). With increasing rotor diameter (from 50 to 160 m) at fixed ground clearance, the collision risk per turbine increased in all species (+151 to +558 %), while the collision risk per MW decreased in the species with low mode (-50 % to -57 %). These results underpin that wind turbine dimensions can have substantial effects on the collision risk of raptors. As the effects varied between species, wind energy planning should consider the composition of the local bird community to optimise wind turbine dimensions. For species with a low mode of flight height, the collision risk for a given total power capacity could be reduced by increasing ground clearance, and using fewer turbines with larger diameter.