A Heterogeneous Ultrasound Open Scanner for the Real-Time Implementation of Computationally Demanding Imaging Methods

Ultrasound (US) open scanners have recently boosted the development and validation of novel imaging techniques. They are usually split into hardware- or software-oriented systems, depending on whether they process the echo data using embedded field programmable gate arrays (FPGAs)/digital signal processors (DSPs) or a graphics processing unit (GPU) on a host personal computer (PC). The goal of this work was to realize a high-performance heterogeneous open scanner capable of leveraging the strengths of both hardware- and software-oriented systems. The elaboration power of the 256-channel ultrasound advanced open platform (ULA-OP 256) was further enhanced by embedding a compact co-processing (CP) GPU system-on-module (SoM). By carefully avoiding latencies and overheads through low-level optimization work, an efficient peripheral component interconnect express (PCIe) communication interface was established between the GPU and the processing devices onboard the ULA-OP 256. As a proof of concept of the enhanced system, the high frame rate (HFR) color flow mapping (CFM) technique was implemented on the GPU SoM and tested. Compared to a previous DSP-based implementation, higher real-time frame rates were achieved together with unprecedented flexibility in setting crucial parameters such as the ensemble length (EL). For example, by setting EL =64 and a continuous-time high-pass filter (HPF), the flow was investigated with high temporal and spatial resolution in the femoral vein bifurcation (frame rate =1.1 kHz) and carotid artery bulb (4.3 kHz), highlighting the flow disturbances due to valve aperture and secondary velocity components, respectively. The results of this work promote the development of other computational-expensive processing algorithms in real time and may inspire the next generation of the US high-performance heterogeneous scanners.