Related Experiment Video
Updated: Jun 11, 2025

Estimation of Crystalline Cellulose Content of Plant Biomass using the Updegraff Method
Published on: May 15, 2021
Development of a novel method based on extraction mediated by a semipermeable membrane to determine Cd and Cr in
Karoline D do Amaral1, Graziela S Silva1, André S Araújo1
1Departamento de Química Analítica, Universidade Federal Fluminense, Outeiro de São João Batista s/n, Centro, Niterói, RJ, 24020-141, Brazil.
Abstract:
This work proposes a novel method to determine the Cd(II) and Cr(III) content in commercial sugar samples. It is based on the extraction of the analytes (as ammonium pyrrolidine dithiocarbamate complexes) into a semipermeable membrane device (SPMD) filled with CHCl3. After extraction, the SPMD was deployed and opened, and the analytes were recovered from the organic phase by back extraction with a 4.2 mol L-1 HNO3 solution. The analytes present in the acid extract were measured with graphite furnace atomic absorption spectrometry. Under optimized conditions, the limit of quantification of the method was 1.2 and 3.1 ng g-1 for Cd(II) and Cr(III), respectively. Twelve samples of different types of sugar were analyzed. In addition, a recovery test was performed to evaluate the accuracy of the method. The recovery percentage was 90 %-102 % for Cd(II) and 85.2 %-103 % for Cr(III).
More Related Videos
08:21Determination of Inorganic Arsenic in a Wide Range of Food Matrices using Hydride Generation - Atomic Absorption Spectrometry.
Published on: September 1, 2017
08:55Methods of Ex Situ and In Situ Investigations of Structural Transformations: The Case of Crystallization of Metallic Glasses
Published on: June 7, 2018
Related Concept Videos
Atomic Absorption Spectroscopy: Lab
Solutions containing organic solvents, such as low-molecular-mass alcohols, esters, or ketones, enhance absorbances by increasing...
Atomic Absorption Spectroscopy: Atomization Methods
Sample Preparation for Analysis: Advanced Techniques
Acid digestion with strong acids is commonly used to dissolve inorganic materials that are insoluble (do not dissolve) in water. This method can be useful for...