Related Experiment Video
Updated: Jun 11, 2025

Sampling, Identification and Characterization of Microplastics Release from Polypropylene Baby Feeding Bottle during Daily Use
Published on: July 24, 2021
Deciphering anammox response characteristics and potential mechanisms to polyethylene terephthalate microplastic
Wenli Fan1, Boya Wei1, Yuxiao Zhu1
1School of Chemistry and Materials Science, Jiangsu Normal University, Xuzhou 221116, PR China.
Abstract:
Microplastics (MPs) are frequently detected in the wastewater. Herein, the short-term and long-term effects of polyethylene terephthalate (PET) MPs on anammox granular sludge were investigated and the potential response mechanisms were analyzed. Results showed that although short-term exposure of anammox granular sludge to PET-MPs induced a stress response, the nitrogen removal performance was not significantly affected. By contrast, long-term exposure to PET-MPs inhibited nitrogen removal performance with increased exposure time and PET-MP concentration. The total nitrogen removal efficiency (TNRE) decreased by 28.7 % when sludge was exposed to 200 mg/L of PET-MPs. However, the anammox activity recovered with prolonged operation time, and approximately 87 % of the initial TNRE was recovered after three months. Microbial community evolution and metabolic exchange variations were the potential response mechanisms of anammox granular sludge to PET-MP exposure, with PET-MP exposure decreasing the anammox bacteria growth rate and relative symbiotic bacterial abundance in the anammox consortia and hindering cross-feeding pathways. The findings of this study provide novel insight into anammox behavior when treating wastewater containing PET-MPs.
Related Concept Videos
Types of Step-Growth Polymers: Polyesters
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the...
Olefin Metathesis Polymerization: Acyclic Diene Metathesis (ADMET)
Similar to cross-metathesis, ADMET also involves the formation of metallacyclobutane intermediate by [2+2] cycloaddition of one of the double bonds of a terminal diene with...
Free-Radical Chain Reaction and Polymerization of Alkenes
Olefin Metathesis Polymerization: Overview
Ruthenium-based Grubbs catalyst is the most commonly used catalyst for olefin metathesis polymerization. Grubbs catalyst consists...

