Related Experiment Video
Updated: Jul 19, 2026

Development of Sulfidogenic Sludge from Marine Sediments and Trichloroethylene Reduction in an Upflow Anaerobic Sludge Blanket Reactor
Published on: October 15, 2015
Sludge size affects sorption of organic micropollutants in full-scale aerobic granular sludge systems
Zhaolu Feng1, Heike Schmitt2, Mark C M van Loosdrecht3
1Environmental Technology, Wageningen University & Research, P.O. Box 17 6700 AA Wageningen, the Netherlands.
Abstract:
Aerobic granular sludge (AGS) is gaining popularity as an alternative to activated sludge for wastewater treatment. However, little information is available on AGS regarding the removal of organic micropollutants (OMPs) through sorption. In this study, the sorption behavior of 24 OMPs at environmentally relevant concentrations (1 μg/L) was investigated in six sludge fractions of varying sizes (>4 mm, 2-4 mm, 1-2 mm, 0.6-1 mm, 0.2-0.6 mm, and <0.2 mm) from a full-scale AGS reactor using batch experiments. Sorption was significant (removal efficiency >40 %) for 10 OMPs, including 4 zwitterionic and 6 positively charged pharmaceuticals, indicating the importance of electrostatic interaction for OMP sorption in AGS systems. Larger granules exhibited a higher sorption coefficient and capacity than smaller AGS fractions, probably due to increased extracellular polymeric substance content for larger granules. Equilibrium OMP sorption was only reached after 72 h in granules larger than 2 mm, indicating an effect of longer diffusion distance for OMPs into larger granules. Additionally, compared to activated sludge, AGS demonstrates a similar or even slightly higher sorption capacity for 10 OMPs at 1 μg/L. Overall, this study is the first to investigate the sorption behavior of six AGS size fractions for OMPs at environmentally relevant concentrations (1 μg/L) and propose the possible roles of different-sized sludge in OMP sorption in the full-scale AGS reactor.
Related Concept Videos
Precipitate Formation and Particle Size Control
The obtained precipitate should be either a pure substance of known composition or easily converted to one by a simple process, such as ignition or drying. In addition, the precipitate should be insoluble and easily filterable. In general, filterability...
Factors Affecting Dissolution: Particle Size and Effective Surface Area
Microbial Wastewater Treatment
Scale-Up Processes
Biological Treatment of Effluent and Waste Water

