Advanced nano modification of ecofriendly glauconite clay for high efficiency methylene blue dye adsorption

This research focuses on the utilization of nano glauconite clay as an environmentally friendly sorbent for the removal of cationic dyes, particularly Methylene Blue (MB), from polluted water. The glauconite clay was sourced from the El Gidida region of Egypt and subjected to grinding in a laboratory-type ball mill to ensure homogeneity and increase the active sites available for the adsorption process. The resulting ball milled nano clay (BMNC) was characterized using techniques such as X-ray fluorescence (XRF), Fourier transform infrared (FT-IR) spectroscopy, transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS), and X-ray diffraction (XRD). The concentration of MB dye was monitored using UV-Vis spectroscopy to assess the adsorption capacity of BMNC under various conditions including pH, time, dose, and temperature. The optimal conditions for the adsorption process were determined to be a pH range of 7-8, a contact time of 60 min, and a dose of 200 ppm, resulting in an adsorption capacity of 128 mg/g. This process demonstrated both low cost and high speed. The adsorption mechanism of MB on the BMNC surface was evaluated through kinetics, adsorption isotherms, and thermodynamics. The experimental data indicated an endothermic, spontaneous, and thermodynamically favourable adsorption process, which was further supported by simulated modelling results using Forcite program. The in-silico data aligned well with the experimental findings. Additionally, the study assessed the interference of salts, metal ions, and other dyes on MB adsorption onto BMNC, showing promising results. These findings strongly support the effectiveness of our sorbent substrate under challenging conditions.