Performance of yellow and pink oyster mushroom dyes in dye sensitized solar cell

A solar photovoltaic (PV) cell, is an electrical device that uses the PV effect to convert light energy into electricity. The application of oyster mushroom dyes in dye sensitized solar cell (DSSC) is a novel strategy to substitute the costly chemical production process with easily extractable, environmentally acceptable dyes. Both dyes of yellow and pink oyster mushrooms were extracted using the same process but dried into powder form using two techniques, warm drying and freeze drying. The characterization was carried out utilizing current-voltage (I-V) characterization for electrical properties, Ultraviolet-Visible (UV-Vis) spectrophotometer for optical properties, Field Emission Scanning Electron Microscopy (FESEM), and Atomic Force Microscopy (AFM) for the structural properties. It was found that freeze-dried pink and yellow oyster mushroom had shown the good properties for DSSC application as it produced energy bandgap which lies within the range of efficient dye sensitizer; 1.7 eV and 2.2 eV, the most uniform distribution of pores and a nearly spherical form in FESEM analysis, and AFM result obtained with the highest root mean square (RMS) roughness value (26.922 and 34.033) with stereoscopic morphologies. The data proved that mushroom dyes can be incorporated in DSSC with the optimization of drying method in the extraction process, dilution of dye and the layer of deposition on the glass substrate. The current density-voltage (J-V) characteristics of fabricated DSSC was characterized using Newport Oriel Sol3A solar simulator under AM 1.5 Sun condition (100 mW/cm², 25 ^oC). From the result obtained by solar simulator, the fabricated FTO/TiO₂/Pleurotus djamor dye/Pt indicated the V_oc of 0.499 V and J_sc of 0.397 mA/cm².