Multi-functional programmable active acoustic meta-device: acoustic switch, lens, and barrier

Active acoustic metamaterials (AAMM) have garnered special attention because of their potential as multi-function devices. In this direction, the present article demonstrates a novel AAMM that can be programmed as a multi-functional Active Acoustic Meta-device (AAMD) that can switch functionalities between Acoustic Switch (AS), Acoustic Lens (AL), and Acoustic Barrier (AB). Functionality: AL corresponds to the wave vector space, and AS and AB correspond to the frequency space of the proposed AAMM. Additional functionality, such as acoustic logic gates in phase space, is also envisaged. The proposed design is found to change the dispersion diagram by acquiring different configurations while keeping the basic design parameters constant. These design parameters include constituent elements, lattice constants, and filling fractions. Further, for the said functionalities, the proposed AAMM does not rely on the deformation characteristics of the constituents. It rather capitalises on the possible relative displacements of the scatterers. As an AL, AAMM demonstrates zero angle refraction, i.e., collimation, and negative refraction of the transmitted beam at a given angle of incidence over a frequency range of 200 kHz (22.22% of the applied frequency sweep, a.f.s.). AB is shown to attenuate acoustic energy over a frequency range of 700 kHz (77.78% of a.f.s.) compared to its reference and foundation design, a statically designed Phononic Crystal (PnC). Furthermore, as AS, it operates over the entire range of applied frequency sweep (100 kHz to 1000 kHz), i.e., over the frequency range of 900 kHz (100% of a.f.s.).