Related Experiment Video
Updated: Jun 10, 2025

Blast Quantification Using Hopkinson Pressure Bars
Published on: July 5, 2016
Research on the prediction of blasting fragmentation in open-pit coal mines based on KPCA-BAS-BP
Shuang Liu1, Enxiang Qu2, Chun Lv2
1School of Architecture and Civil Engineering, Qiqihar University, Qiqihar, 161006, Heilongjiang, People's Republic of China. 03508@qqhru.edu.cn.
Abstract:
The blasting block size of open-pit mines is influenced by many factors, and the influencing factors have a very complex nonlinear relationship. Traditional empirical formulas and a single neural network model cannot meet the requirements of modern blasting safety. To improve the prediction accuracy of blasting block size, the measured data of Beskuduk open-pit coal mine is used as training and testing samples. Seven factors including rock tensile strength, rock compressive strength, and blast hole spacing are selected as input variables of the prediction model. The average size of blasting fragmentation X50 is used as the output variable of the prediction model. The kernel principal component analysis (KPCA) is adopted to reduce the dimensionality of the input variables. The beetle antennae search algorithm (BAS) is selected to optimize the parameters of the initial weights and thresholds of the back propagation (BP) neural network. Finally, prediction model of blasting fragmentation in open-pit coal mine based on KPCA-BAS-BP is established. The results show that the average relative error of the model is 1.77%, and the root mean square error is 1.52%. Compared with the unoptimized BP neural network and the BP neural network optimized by the artificial bee colony algorithm (ABC) model, this model has higher prediction accuracy and is more suitable for predicting the blasting block size of open-pit coal mines, it provides a new method for predicting the fragmentation of blasting under the influence of multiple factors, filling the gap in related theoretical research, and has certain practical application value.
More Related Videos
10:27A Uniaxial Compression Experiment with CO2-Bearing Coal Using a Visualized and Constant-Volume Gas-Solid Coupling Test System
Published on: June 12, 2019
06:20Author Spotlight: Development of an Automated Camera-Based System for Real-Time Blast Overpressure Monitoring and TBI Risk Assessment in Military Training
Published on: December 6, 2024
Related Concept Videos
Compacting Factor test
The procedure begins by placing concrete into the upper hopper without any compaction. Once filled, the bottom door of this hopper is opened,...
Quarrying of Stone
One common method involves using a diamond belt saw to cut large blocks from the quarry face. These blocks can be about 50 feet long and 12 feet high. After the initial vertical cut, drilling is performed at the base of the...