Controlled Fabrication of Wafer-Scale, Flexible Ag-TiO₂ Nanoparticle-Film Hybrid Surface-Enhanced Raman Scattering...

As an important trace molecular detection technique, surface-enhanced Raman scattering (SERS) has been extensively investigated, while the realization of simple, low-cost, and controllable fabrication of wafer-scale, flexible SERS-active substrates remains challenging. Here, we report a facile, low-cost strategy for fabricating wafer-scale SERS substrates based on Ag-TiO₂ nanoparticle-film hybrids by combining dip-coating and UV light array photo-deposition. The results show that a centimeter-scale Ag nanoparticle (AgNP) film (~20 cm × 20 cm) could be uniformly photo-deposited on both non-flexible and flexible TiO₂ substrates, with a relative standard deviation in particle size of only 5.63%. The large-scale AgNP/TiO₂ hybrids working as SERS substrates show high sensitivity and good uniformity at both the micron and wafer levels, as evidenced by scanning electron microscopy and Raman measurements. In situ bending and tensile experiments demonstrate that the as-prepared flexible AgNP/TiO₂ SERS substrate is mechanically robust, exhibiting stable SERS activity even in a large bending state as well as after more than 200 tensile cycles. Moreover, the flexible AgNP/TiO₂ SERS substrates show excellent performance in detecting sub-micrometer-sized plastics (≤1 μm) and low-concentration organic pollutants on complex surfaces. Overall, this study provides a simple path toward wafer-scale, flexible SERS substrate fabrication, which is a big step for practical applications of the SERS technique.