A Description of the Isothermal Ageing Creep Process in Polymethyl Methacrylate Using Fractional Differential Models

Fractional differential viscoelastic models can describe complex material behaviours and fit experimental data well; however, the physical significance of model parameters is difficult to express. In this study, the fractional differential Maxwell, Kelvin, and Zener models were used to fit the short-term creep compliance curves of polymethyl methacrylate at different ageing times. The model fits were in good agreement with the experimental data. As the ageing time increased, the fractional differential Zener model showed a relative increase in the modulus parameter of the spring and a relative decrease in the modulus parameter reflecting the viscosity of the spring-pot, which indicated that physical ageing made the material more elastic. The relaxation time of the material increased, which indicated that the physical ageing reduced the free volume of the material, hindered the movement of molecules/segments, and increased the time required for the material to reach equilibrium. The fractional order of the model decreased, which reflected the phenomenon that physical ageing reduced the creep compliance of the material. Using the relaxation time as the time scale, the creep curves at different ageing times under the same stress level could be superimposed, naturally presenting the time-ageing time equivalence principle.