Energy-Efficient Geopolymer Composites Containing Phase-Change Materials-Comparison of Different Contents and Types

The purpose of this study was to analyze the effects of phase-change components on the properties of geopolymer foams. Geopolymer foams are lightweight foamed geopolymers that are characterized by a high degree of porosity. Phase change materials, on the other hand, are compounds that, when added to a material, allow it to absorb, store, and then release large amounts of energy. Three types of PCMs, i.e., MikroCaps, GR42, and PX25, were introduced at 15% by weight. Geopolymer materials were produced based on silica fly ash, and hydrogen peroxide H₂O₂ was used to foam the geopolymer structure. The PCM geopolymer composites were cured at 60 °C. The produced materials were tested for physical, chemical, and thermal properties. The tests included oxide and mineral composition analysis of the base material, PCM particle size analysis, apparent density and porosity tests on the foams, water leachability tests, thermal tests (λ, Cv, Cp, α), and structural and textural analysis. The most relevant tests to confirm the performance of the phase-change materials were thermal tests. With the introduction of PCMs, volumetric heat capacity increased by as much as 41% and specific heat by 45%, and thermal diffusivity decreased by 23%. The results confirm the great potential of geopolymer composites as modern insulation materials for buildings and structures.