Experimental Study of Used Wind Turbine Blades for Their Reuse in Slope and Trench Protection

This article presents the results of an experimental study carried out to assess the possibility of using waste wind turbine blades as retaining wall structures for slopes and trenches. The use of Vestas and LM-type blades as retaining wall components was assumed, based on 'columns' made of Vestas-type closed profiles filled with concrete and 'slabs' of fragments extracted from LM-type blades. The results of the tests and comparisons of the displacement and strain values of the components obtained using different measurement methods are presented in this paper. The force-strain and force-displacement relationships obtained from the tests were used to validate numerical models of slope protection walls and excavations designed from used wind turbine blades. According to our research, there is a high degree of variability in the strength parameters and deformation of the composite elements made from the wind turbine blades. Therefore, in the case of this type of material, characterized by a significant variation in carrying capacity, deformability, and the nature of the failures, the use of different measurement methods makes it possible to obtain much of the data necessary for assessing the reusability of wind turbine blades in building.