Density-profile imaging using a second harmonic dispersion interferometer configured with reflective-beam expanders

A Second-Harmonic Dispersion Interferometer (SHDI) is assembled to measure the two-dimensional, line-integrated density profile of a pulsed-plasma jet using probe-beam diameters well beyond the 1 mm diameters typically used in such instruments. An initial prototype demonstrated the technique using 7 mm beam diameters, which are now increased to 35 mm diameter using two types of beam expanders: an achromatic-beam expander (ABE) or a reflective-beam expander (RBE). ABEs were found to add a periodic background to the measured-phase image with a magnitude of the order of Δϕ ∼ 2π radians, compared to the background phase noise level in the system configured without beam expanders at Δϕbg ∼ 0.025 radians. Subtraction of the background phase in a sample image reduced the effect of the ABE phase offset to a level of Δϕ ∼ 0.1 radians, enhancing the quality of the density measurements. Reflective-beam expanders (RBEs) did not modify the background phase appreciably and were a significant improvement, allowing the instrument to be used for 2D (r, z) density-profile measurements of a 3 cm diameter × 5 cm long, pulsed-plasma jet. Variations in the timing parameters for the plasma gun, specifically the gas valve opening time and the gas-injection delay, for a constant discharge current were used to map the plasma gun's performance, indicating a nominal line-integrated electron density of Nedl ≳ 3 × 1015 cm-2 and a volumetric density of Ne ≃ 9 × 1015 cm-3. The results obtained for the RBE configuration demonstrate that the 2D-SHDI platform may be scaled to even larger sample areas and a rep-rated system, with the ability to potentially provide for a reproducible, time-resolved (∼1 ns), high resolution (∼100μm) measurement of 2D plasma-density profiles.