Leaching behavior of sustainable concrete made with coal ash wastes as replacement of cement and sand

The coal-fired power plant fly ash (FA) and bottom ash (BA) are gradually used as alternative materials in the concrete. However, knowledge of the leaching characteristics of using both incinerator ashes in concrete production is lacking. This work aimed to evaluate the leaching behavior of the FA and BA used in concrete production by employing batch and tank leaching tests. The outcomes of both leaching tests showed that there was no considerable leaching of any trace elements to the environment, and it remains much lower than standard limitations for utilization as construction materials. The results of cumulative mass discharge showed that the slope of flux time for all elements was less than 0.4 and because of that, primary surface wash-off was the main discharge process of all the heavy metals. Strength test results revealed that there was not much difference between coal ash concrete (CAC) and the control mix at the initial age of curing time. Despite that, at a long period of curing time (180 days), the compressive strength of CAC containing 20% FA as cement replacement and 100% BA as fine aggregate replacement increased by 76% due to the pozzolanic reaction of BA and FA in comparison to the normal concrete, while, due to the high porosity of BA, the workability of CAC decreased by 50%. The outcomes of the current work revealed that the combined use of FA and BA can be counted as a promising alternative in the production of sustainable concrete for structural applications toward sustainable development.