Related Experiment Video
Updated: Jun 21, 2026

Waste Water Derived Electroactive Microbial Biofilms: Growth, Maintenance, and Basic Characterization
Published on: December 29, 2013
Online monitoring of greywater reuse system using excitation-emission matrix (EEM) and K-PARAFACs
Yongmin Hu1, Eberhard Morgenroth1, Céline Jacquin2
1Eawag: Swiss Federal Institute of Aquatic Science and Technology, 8600 Dübendorf, Switzerland; ETH Zürich, Institute of Environmental Engineering, 8093 Zürich, Switzerland.
Abstract:
A currently increasing interest in water reuse is met with the concern about water quality. Excitation-emission matrix (EEM) measurements, which are widely implemented in laboratory analysis, emerge as a promising tool for characterizing both microbial and chemical water qualities in the online monitoring of water reuse systems. However, the robustness of EEM measurements has been rarely validated in actual online monitoring campaigns where predictions are made for new samples independent of those used to establish EEM analysis models, including the popular parallel factor analysis (PARAFAC). In this study, two strategies of conducting PARAFAC were examined for the online monitoring of a greywater reuse system using two EEM datasets from two monitoring periods for model establishment and model testing respectively. With the first strategy that is commonly used in laboratory analyses, an entire EEM datasets from one period was used to establish one PARAFAC model, and the maximum fluorescence intensity (Fmax) of a PARAFAC component was used to predict total cell count (TCC) in another period. However, under the disturbance of dissolved organic matter (DOM) fluorescence in the background, Fmax gave unreliable predictions in model testing. To address this problem, a second and novel strategy was proposed using an EEM clustering and PARAFAC component shift mining technique. This unsupervised algorithm, named K-PARAFACs, automatically groups EEMs into K clusters and on each cluster establishes a cluster-specific PARAFAC model with distinct component shapes. With this method, multiple PARAFAC models were established on one EEM dataset, with each model representing samples with certain TCC ranges and DOM compositions. In model testing, these cluster-specific PARAFAC models served as EEM classifiers. A new sample was not characterized by Fmax but by the cluster-specific model that best fitted the EEM signal of the sample with the least numerical error. The proposed strategy demonstrates its robustness by successfully predicting the TCC trend in test datasets. Our findings suggest that K-PARAFACs is a promising tool that enables robust qualitative monitoring of water reuse systems with background DOM variability.
More Related Videos
08:49Vegetated Treatment Systems for Removing Contaminants Associated with Surface Water Toxicity in Agriculture and Urban Runoff
Published on: May 15, 2017
08:17Coupling Carbon Capture from a Power Plant with Semi-automated Open Raceway Ponds for Microalgae Cultivation
Published on: August 14, 2020
Related Concept Videos
Testing Water Quality
Microbial Wastewater Treatment
Biological Treatment of Effluent and Waste Water