Related Experiment Video
Updated: Jun 10, 2025

Operation of a 25 KWth Calcium Looping Pilot-plant with High Oxygen Concentrations in the Calciner
Published on: October 25, 2017
Synchrotron-aided exploration of REE recovery from coal fly ashes within a Canadian context
Yuwei Wu1, Guohe Huang1, Peng Zhang1
1Institute for Energy, Environment and Sustainable Communities, University of Regina, Regina, Saskatchewan, S4S 0A2, Canada.
Abstract:
Coal ashes in Canada have gained attention as a potential source for recovering rare earth elements (REE) from industrial waste. However, the complex chemical properties of coal ashes have made it difficult to determine the desirability, feasibility, and viability of REE recovery. To address this issue, this study systematically investigated distribution and structural information, speciation and chemical-binding state, and purity and extraction capacity of REE in multiple Canadian coal ashes (i.e., 2 fly ash and 1 bottom ash samples) through synchrotron-based X-ray fluorescence mapping and adsorption spectrum analyses, as well as high-resolution REE sequential extraction quantitation. The results showed that Y, Ce, and La were present in the glass phase of the bottom ash, and the distributions of these REE elements correlated with Ca. The XANES analysis revealed that the dominant form of REE in coal fly ash (CFA) was REE oxides, indicating a transformation during combustion, while Y2O3 and Y2(CO3)3 were the predominant Y species identified in CFA. The study found that there is no correlation between P and REEs, suggesting that REEs in CFA may exist as discrete particles rather than being associated with amorphous glass. The extractability of REEs in bottom ash samples was lower than that in fly ash samples. Additionally, the benefits of REE recovery were estimated to be USD 99.82 to 215.21 per ton of fly ash through life cycle analysis, indicating that REE recovery from fly ashes is a promising path to supplement the REE supply chain in Canada.
More Related Videos
10:31Detection and Recovery of Palladium, Gold and Cobalt Metals from the Urban Mine Using Novel Sensors/Adsorbents Designated with Nanoscale Wagon-wheel-shaped Pores
Published on: December 6, 2015
10:12Synchrotron X-ray Microdiffraction and Fluorescence Imaging of Mineral and Rock Samples
Published on: June 19, 2018